--------if you like my work please, follow me and spread some love giving some like and follow🙏---------

🪄Harry potter - Hogwarts castle🪄

This print only require 3 Colors, super easy and detailed🤩

The seat on the back is shaped to accommodate a 1mm thick magnet with a diameter of 10mm for the 100x100 profile:

This model is simply resizable directly in Bambu Studio using the scale function as follow (Note that you must not modify Z axis dimensions and you could lose the magnet size form):

-If some stringing occour you can simply remove it using your lighter as follow:

Use the flame for only few seconds and you will be surprised by the result! from left to right picture like magic😄

--------------------------------------------------------------------------------------------------------------------------------

HUEFORGE Instructions:

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

Filaments Used:
PLA BambuLab Basic Black Transmission Distance: 0.6
PLA BambuLab Basic Orange Transmission Distance: 5
PLA BambuLab Basic Yellow Transmission Distance: 6

Swap Instructions:
Start with Black
At layer #21 (1.76mm) swap to Orange
At layer #28 (2.32mm) swap to Yellow for the rest.

I used Textured pei plate, if you have a different one you should change it in settings when print this

You can also use different colors, you only need to respect layer height instructions

If you want any modifications or variations, feel free to ask, if you have specific requests write to me privately, and I will do my best to fulfill your desires❤️