UPDATE 5/7/2023:

I added a new limit switch bracket called “X limit switch bracket-MOD-SPRITE.” This design moves the limit switch over to the left 6.5mm so that the sprite extruder nozzle homes 1mm to the left of the bed. With the stock limit switch bracket and the sprite extruder, the nozzle homes 5.5m to the right of the left edge of the bed, reducing the X axis print volume.

UPDATE 3/12/2023:

I added a new modified “X_gantry_cam_mount” design, which moves the camera down 10mm, to the left 10mm, and also tilts it downward at a 15 degree angle. I find that this significantly improves the view of the camera. The new design is called “X_gantry_cam_mount_v2”

A mount for the Logitech C920 webcam to be mounted to the gantry so it raises and lowers with the print head. The “X limit switch bracket” replaces the original X axis limit switch bracket and add two holes with heat set inserts for the camera mount to attach.

The actual camera adapter was taken from maxdeangelis's design from Thingiverse: Logitech Camera Mount Ender 3 by maxdeangelis - Thingiverse

The camera does need to be disassembled to install this adapter and remove the original base.

I have included 3 variations of the x axis limit switch cover:

1. Standard
2. With cable rail, for zip-tying cables to
3. With cable chain mounting points

Hardware required:

1. 2x M3 H6 heat set inserts
2. 2x M3x6 or M3x8 screws (for screwing into heat set inserts)
3. 1x M3x12 screw for attaching camera to camera mount arm

The cable chain mounts were reverse engineered from this model:

Ender 3 x Micro Swiss Direct Drive Cable Chain Gantry Mounts by SnowmanTechie - Thingiverse