Frankenstein Head with Animated Eyes

Description

This Frankenstein head incorporates fascinating features:

• 3D printed, the hair part doesn't need supports, and the head was printed upside down with custom supports at key edges.
• An easy-access cap allows you to customize the internal electronics or change the eyes to LEDs, for example.
• Details like staples and body screws are printed in gray without the need for supports.
  

Materials for this project, you will need:

• ESP32 code by Joshua Marker available on GitHub.
• ESP32 DevKit V1.
• 1.5-inch Waveshare OLED screens (x2).
  

Uncanny_Eyes

https://github.com/adafruit/Uncanny_Eyes

'Uncanny eyes' for Adafruit 1.5" OLED (product #1431) or 1.44" TFT LCD (#2088). Works on PJRC Teensy 3.x and on Adafruit M0 and M4 boards (Feather, Metro, etc.). This code uses features specific to these boards and WILL NOT work on normal Arduino or other boards!

How-to guide with parts list and 3D models is here:

https://learn.adafruit.com/animated-electronic-eyes-using-teensy-3-1/overview

Teensy 3.x w/OLED screens: use 72 MHz board speed -- 96 MHz requires throttling back SPI bitrate and actually runs slower!

Directory 'uncannyEyes' contains Arduino sketch for PJRC Teensy 3.1 & Adafruit M0 & M4. 'graphics' subfolder has various eye designs, as #include-able header files.

Folder 'convert' contains Python sketch for generating graphics header files. Requires Python Imaging Library. Example images are also in this directory.

OLED Breakout Board - 16-bit Color 1.5" w/microSD holder - EYESPI Connector

OLED Breakout Board - 16-bit Color 1.5 w/microSD holder [EYESPI Connector] : ID 1431 : $39.95 : Adafruit Industries, Unique & fun DIY electronics and kits

Thanks to Jose Aveleira for this magnificent model

Frankenstein Head with Animated Eyes par Jose Aveleira | Téléchargez gratuitement un modèle STL | Printables.com