Foil Dispenser Version 2
Print Profile(11)
Description
It’s designed for foil rolls with a maximum length of 31 cm, so please check before printing.
This is version 2. It has the tear-off edge at the bottom, so you don’t have to keep opening the foil dispenser to tear off a sheet.
It is printed in two parts and needs to be glued together.
You can add the text by yourself in the Slicer Settings.
optional:
you can add 4 magnets at the corners, they need to be 7x1mm
I used this one: Amazon Link
Here you can find the Version 1:
Differnece between the Files:
Normal Version:
Maximum Diameter of the Roll: 43mm
Cut in two pieces, that need to be glued together
Thin Version:
Maximum Diameter of the Roll: 38mm
Cut in two pieces, that need to be glued together
Big Version:
Maximum Diameter of the Roll: 52mm
Cut in two pieces, that need to be glued together
Normal Version, no cut:
Like above, but not cut in two pieces
Thin Version, no cut:
Like above, but not cut in two pieces
Big Version, no cut:
Like above, but not cut in two pieces
License
You may create derivative works based on this object, provided that all such derivative works are published exclusively on the MakerWorld platform and include proper attribution to the original creator. You may not share, upload, host, distribute, or publish this object—or any derivative work of this object—on any other digital platform, marketplace, or distribution channel. Commercial use of this object and any derivative works is strictly prohibited. This includes, but is not limited to, selling, renting, sublicensing, or using the object in any context in which you receive monetary compensation or other financial benefits.
Comment & Rating (154)