Eiffel Tower hueforge

Project: torre efiel.hfp

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.24mm

The Model is 327.45x434.72mm in size

You may print at higher layer heights below the Base Thickness of 0.48mm
The Max allowed Thickness is 2.4mm and the Actual Thickness is 2.32mm

    #080a0d PLA PolyLite Black  Transmission Distance: 0.3
    #4c5f71 PLA BambuLab Basic Blue Gray  Transmission Distance: 3
    #ffffff PLA BambuLab Matte Ivory White  Transmission Distance: 3.5
    #000000 PLA BambuLab Basic Black  Transmission Distance: 0.6
    #c00d1e PLA BambuLab Basic Red  Transmission Distance: 4
This print uses 5 unique filaments

Swap Instructions:
    Start with PolyLite Black
    At layer #5 (0.56mm) swap to BambuLab Basic Blue Gray
    At layer #8 (0.8mm) swap to BambuLab Matte Ivory White
    At layer #13 (1.2mm) swap to BambuLab Basic Black
    At layer #15 (1.36mm) swap to BambuLab Basic Red
    At layer #22 (1.92mm) swap to BambuLab Matte Ivory White for the rest.