nueva chica dragon con bonito vestido rojo y espectacular dragon usando hueforge para impromir en 3D

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

Filaments Used:
PLA Jayo Negro Transmission Distance: 0.3
PLA PolyLite Stone Blue Transmission Distance: 0.5
PLA BambuLab Basic Jade White Transmission Distance: 6
PLA Jayo Negro Transmission Distance: 0.3
PLA BambuLab Basic Red Transmission Distance: 4
PLA BambuLab Basic Jade White Transmission Distance: 6

Swap Instructions:
Start with Negro
At layer #8 (0.72mm) swap to Stone Blue
At layer #9 (0.8mm) swap to Jade White
At layer #15 (1.28mm) swap to Negro
At layer #19 (1.6mm) swap to Red
At layer #22 (1.84mm) swap to Jade White for the rest.