IKEA Skadis Shelf Panel (16cm x 8cm) - Sturdy
Copyright Claim
IKEA Skadis Shelf Panel (16cm x 8cm) - Sturdy
Boost
133
320
62
Print Profile(2)
0.2mm layer, 2 walls, 15% infill
Designer
1.2 h
1 plate
- no middle bumps - 0.2mm layer, 2 walls, 15% infill
Designer
1 h
1 plate
Open in Bambu Studio
Boost
133
320
62
6
450
320
Released
Description
16cm x 8cm small shelf panel for IKEA Skadis board. The fixture is snug fit providing a very sturdy platform for displaying small objects.
A small bump is added in the middle for extra security. The panels can be placed side by side. Works with the 8cm x 8cm as well.
Comment & Rating (62)
All
Print Profile
0.2mm layer, 2 walls, 15% infill
die hacken sind nicht so schön aber sonst gut
(Edited)
The designer has replied
1
Reply
Thank you for trying the model out. I haven't had the tips like that through my prints... I am curious why though and what can be done to improve.
0
Reply
Boosted
Print Profile
0.2mm layer, 2 walls, 15% infill
Very sturdy fit! Nice! I adjusted the depth for my needs. Thank you for the model!
The designer has replied
1
Reply
Fantastic!! Thank you for your comment and image!! 😊
0
Reply
Print Profile
0.2mm layer, 2 walls, 15% infill
nice fit, will print more !
The designer has replied
1
Reply
Oh thank you for your comment and the image post!! Made me really happy 😊
(Edited)1
Reply
Print Profile
0.2mm layer, 2 walls, 15% infill
turned out nice. thanks
The designer has replied
1
Reply
Thank you for using the model and thank you for posting the image!!! 😊
0
Reply
Print Profile
0.2mm layer, 2 walls, 15% infill
tres bon fichier facile à imprimer
The designer has replied
1
Reply
Thank you very much for your comment. So happy to see the picture. Thanks again!!
0
Reply
Print Profile
0.2mm layer, 2 walls, 15% infill
The designer has replied
1
Reply
Oh nice blue! Thank you for using the model and thank you for posting the image! So happy to see it used😊
(Edited)1
Reply
Print Profile
0.2mm layer, 2 walls, 15% infill
I don't understand the dots at the back, but it works fine with tilted due to those.
The designer has replied
1
Reply
Hi @geniejhang, thank you for trying it out. The dots supposed to be fit into the middle hole, one lower than the holes for L shaped hooks. You might need to push the panel slowly but firmly down to feel the click - once it's all the way in, the tray panel should be level against the Skadis board. I hope this explain what the dots are for, but please let me know if unclear. Thanks again!
0
Reply
Replying to @SaitoSquare
Ahh. Okay. So, it was awkward because I put it into the bottom row lol.
Thanks!
(Edited)1
Reply
Replying to @geniejhang
Hi @geniejhang thank you for making me realized that the middle dots gets in a way when the tray is positioned at the bottom row! The thought never occured to me! I have added a version without dots as alternative here. Thanks again!
0
Reply
Print Profile
- no middle bumps - 0.2mm layer, 2 walls, 15% infill
(Edited)
The designer has replied
0
Reply
Hi @hansdiegans! Sorry about having an issue... I was wondering if you could share more info on that, so that I can learn and improve.
0
Reply
Replying to @SaitoSquare
3 out of 4 of the hacks were broken during support removal
0
Reply
Replying to @hansdiegans
Oh I see. I'll try looking into this this weekend. Thank you for further info, @hansdiegans 😊
0
Reply
Print Profile
0.2mm layer, 2 walls, 15% infill
this was my first print with supports and a little defect. 2 of the pins didn’t really come out perfectly causing one to snap off right away. still hangs beautifully on the skadis though. fits in perfectly with the original ikea stuff.
The designer has replied
1
Reply
Oh sorry about having pins snapped off... It did happen to me too and I was hoping the last change of the support type (from tree slim to organic) should improve that situation. I'll look in at some point though. One thing I noticed, by the way, was that when I 'baked' the reel (dry up), the print got a lot better and I felt the support come off easier.
0
Reply
Print Profile
0.2mm layer, 2 walls, 15% infill
It doesnt have a 90° angle, but other than that works perfectly fine
The designer has replied
1
Reply
Oh I am a little embarrassed to realise that I didn't even think of checking the angle... 😅 Thank you for sharing that. I can watch out next time 😊
0
Reply
License
This user content is licensed under a Standard Digital File License.
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Related Models
© 2024 MakerWorld