A dust plug for the AMS Lite hub when using it on a X1 / P1.
The original model was for if you were only using 1 PTFE tube on the A1. However I use the Lite hub as a splitter into the AMS Hub and am running 2 AMS's meaning 2 ports are unused. I removed one of the plugs and tweaked ever so slightly.
Will also of course work if you are using the AMS Lite hub as a Y splitter between the AMS Hub and an external spool.
09/04/24:
I had a comment that the plug was loose and falls out. I went back and looked at mine again and it was loose, so I have basically redesigned.
Slightly thicker plugs
Reduced chamfer.
Longer plugs (could be a couple of mm shorter but I wanted to be able the release ring easier.
Now has a very positive push in.