Leaf lady

I am a fan of the type of art that lets part of the “canvas” tell some of the story. This was my first attempt at that type of art. Once I printed out my first version I refined it a little so you'll see that your product will be ever so slightly different. As for the color choice it's literally what I already had set up in my system. I encourage you to play around with replacing the blue and yellow with orange and red or green and brown.

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.2mm

Swap Instructions:
    Start with True Black
    At layer #6 (0.6mm) swap to Blue
    At layer #12 (1.08mm) swap to True Black
    At layer #15 (1.32mm) swap to Yellow
    At layer #21 (1.8mm) swap to Cream for the rest

The filaments that were used the printed example are:

    PLA Hatchbox True Black Transmission Distance: 0.5
    PLA Qidi Blue Transmission Distance: 4.5
    PLA Qidi Yellow Transmission Distance: 9.3
    PLA PolyLite Cream Transmission Distance: 2