A real eye-catcher in any room!
I split the print into two elements to make it two-colored. The parts are simply stuck together.
I recommend using glow-in-the-dark filament for the "liquid" to achieve the great effect.
Inner diameter: 14 cm
Usable depth: 12 cm
3D PRINTING SETTINGS
The drum can be printed upright.
I printed the liquid upside down, with the drops pointing upwards. This means that no support structure is needed.
The print was printed in PLA with a layer height of 0.2 mm and 5% infill. Set the number of wall lines to 6!
-Temperature of the nozzle: 205 °C
-Temperature of the bed: 60 °C
For good printing plate adhesion, it may be necessary to keep the ventilation low or even switch it off during the first few layers!
Have fun printing and take a look into my other creations ;)
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.