Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

Designed at 200mm square, can be scaled by turn off uniform scaling and don't scale in the z direction

Filaments Used:
Elegoo matte black PLA - TD=0.2

Overture matte purple PLA - TD=0.8

Elegoo matte gray PLA - TD=0.6

Matterhackers build series lime green PLA - TD=2.0

Overture matte white PLA - TD=4.0

Swap Instructions:
Start with Black
At layer #13 (1.12mm) swap to purple
At layer #17 (1.44mm) swap to gray

At layer #20 (1.68mm) swap to green

At layer #23 (1.92mm) swap to white for the rest

Print profile includes filament automatic filament changes with an AMS, if doing manual swaps simply change those commands to pauses. Included profile also includes ironing, which is optional.