Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
Filaments Used:
PLA BambuLab Basic Black Transmission Distance: 0.6
PLA Overture Fresh Red Transmission Distance: 5
PLA BambuLab Basic Orange Transmission Distance: 10
PLA Kingroon Yellow Transmission Distance: 11
PLA BambuLab Basic Jade White Transmission Distance: 5
Swap Instructions:
Start with Black
At layer #7 (0.64mm) swap to Fresh Red
At layer #13 (1.12mm) swap to Orange
At layer #19 (1.6mm) swap to Yellow
At layer #26 (2.16mm) swap to Jade White for the rest.
The black background is thin! It's on purpose for myself, but just so you are aware. Let the print cool before removing from build plate.