Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
Filaments Used:
PLA BambuLab Basic Black Transmission Distance: 0.6
PLA BambuLab Basic Red Transmission Distance: 4
PLA BambuLab Basic Yellow Transmission Distance: 6
PLA BambuLab Basic Jade White Transmission Distance: 5
Swap Instructions:
Start with Black
At layer #9 (0.8mm) swap to Red
At layer #16 (1.36mm) swap to Yellow
At layer #21 (1.76mm) swap to Jade White for the rest.
Comment & Rating (6)