填充100%层高0.04首层0.16.
如果遇到警告请打开如图:
Print at 100% infill with a layer height of 0.04mm with a base layer of 0.16mm。
If you encounter a warning, please open it as shown in the picture:
Filaments Used:
红(red) Transmission Distance: 2.5
黑 (black)Transmission Distance: 0.3
紫 (purple)Transmission Distance: 1
黄 (yellow)Transmission Distance: 6
Swap Instructions:
Start with 红
At layer #11 (0.56mm) swap to 黑(black)
At layer #13 (0.64mm) swap to 紫(purple)
At layer #15 (0.72mm) swap to 黄(yellow) for the rest.
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.