Elecrow 5 Inch Touchscreen Enclosure

I needed a simple case for this 5" touchscreen to protect the exposed PCB on the back. The back cover is easily removable to allow quick access to the on/off switch, while fitting snugly enough so as not to come apart unintentionally. No tools or glue are needed.

Printed in PLA, although PETG might be smart considering the friction-fit and potential heat buildup during longer use. I wouldn't recommend faster print speeds, as the pins tend to slightly bend or warp, which messes with the fit.

To assemble it, just put your display face-down into the part with the rectangular cutout, making sure that the ports align with the side cutout, and lightly press on all four corners. Do the same for the back panel; it only fits in one direction.
 

Specifically designed for the Elecrow 5-inch HDMI Touchscreen (800x480).