Kickers
Print Profile(1)
Description
Filaments Used:
PLA BambuLab Basic Black
PLA BambuLab Basic Blue
PLA BambuLab Basic Red
PLA BambuLab Basic Jade White
Swap Instructions:
Start with Black
At layer #9 (0.8mm) swap to Blue
At layer #13 (1.12mm) swap to Red
At layer #20 (1.68mm) swap to Jade White for the rest.
The Model is 200x150mm in size
You need a different size:
Remember, if scaling is desired, modify only the x and y axes; the z-axis must remain unchanged.
You need an A1 Mini profile; if you are interested, simply send a message.
You can find the matching Hueforge frame here.
https://makerworld.com/en/models/2306996-picture-frame-150x200mm#profileId-2556629
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
You may print at higher layer heights below the Base Thickness of 0.48mm
The Max allowed Thickness is 2.96mm and the Actual Thickness is 2.72mm
Boost Me (for free)
Do you like my model?
Then I would be incredibly grateful for your support in the form of a free Boost Token. And don't forget to follow me! Thank you so much! :)
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (0)