X3D-v3 Bambu X1/P1 COB Light Add-On
Copyright Claim
X3D-v3 Bambu X1/P1 COB Light Add-On
Boost
125
207
30
GIF
Print Profile(3)
Quality Emphasized 0.2mm layer, 2 walls, 10% Gyroid infill
5.9 h
4 plates
P1S X3D COBLED ADD-ON P1S Version
5.4 h
4 plates
P1S PETG X3D COBLED ADD-ON P1S Version PETG
6 h
4 plates
Open in Bambu Studio
Boost
125
207
30
0
379
251
Released
Description
Cob Light Add-On
I get a lot of requests and I don't mind following up on them as it makes these projects more interesting, although it takes a lot of time I really don't mind spending my time but I would appreciate it if you join the club as club members can be assured I follow up on their requests.
If you like you can join my Bambu3D4All FB page
https://www.facebook.com/groups/bambu3d4all/
Comment & Rating (30)
All
The print profile is no longer public
add a phase or supports for the outer, lower wall. it prints in the air and strings like crazy.
add discs or brim to the outer length, so it won't warp. place the parts away from the auxillary fan because it induces warping by cooling down the printed part.
The designer has replied
0
Reply
Why is this in my messages, not my file!
0
Reply
Replying to @SlowpoksWorksho
because you are the print-profile author
(Edited)1
Reply
@mike.haase You can try my edit of this model. It is printed without support because it is cut into parts https://makerworld.com/models/62411
(Edited)0
Reply
Print Profile
Quality Emphasized 0.2mm layer, 2 walls, 10% Gyroid infill
(Edited)
0
Reply
Could you update the design the add some interlocking pieces? I don't even mind to glue them together, but the current design lacks any strength if you need to lift it off it's a bit of a mess as it comes apart.
The designer has replied
1
Reply
Will see what I can do.
0
Reply
also suitable for the p1s?
The designer has replied
0
Reply
In the name it says X1/P1
0
Reply
Yes it is, P1 series and X1 series
0
Reply
Print Profile
Quality Emphasized 0.2mm layer, 2 walls, 10% Gyroid infill
everything the riser was missing, we need light!
The designer has replied
0
Reply
it is a profile for large items, also when I did this profile light was not even available.
A "thanks" would have been nice...
0
Reply
Can you share de COB Light name or link that fits perfectly on this model? maybe amazon, aliexpress, another? thanks in advance
The designer has replied
0
Reply
Print Profile
Quality Emphasized 0.2mm layer, 2 walls, 10% Gyroid infill
good, dont try to print two on one plate, got wrapping and had to print solo again xD
(Edited)0
Reply
Print Profile
P1S X3D COBLED ADD-ON P1S Version
perfect led riser
0
Reply
Print Profile
P1S PETG X3D COBLED ADD-ON P1S Version PETG
good
0
Reply
Print Profile
Quality Emphasized 0.2mm layer, 2 walls, 10% Gyroid infill
Reduced 30 to 10% support as it's enough. Wish they had a system to lock them together but it sits tight between the printer and the ams so won't go anywhere. Led didn't hold with the self adhesive though so have to use hot glue but it's perfect now. Thanks
0
Reply
License
This user content is licensed under a
Creative Commons Attribution-Noncommercial-Share AlikeRemixes (1)
Related Models
© 2024 MakerWorld