One Piece - Luffy Hueforge
Print Profile(1)
Description
Boost Me (for free)
Un petit boost pour mon travail fait toujours plaisir et m'aide beaucoup :)
https://www.patreon.com/cw/3D_MENTIEL
Si vous aimez mon travail, venez faire un tour sur mon Patreon
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
The Model is 199.98x199.98mm in size
You may print at higher layer heights below the Base Thickness of 0.8mm
The Max allowed Thickness is 2.56mm and the Actual Thickness is 2.56mm
#000000 PLA BambuLab Basic Black Transmission Distance: 0.2
#d70610 PLA Forshape+ Red Transmission Distance: 3.6
#f7e735 PLA Forshape+ Yellow Transmission Distance: 7.1
#ffffff PLA Default White Transmission Distance: 5
This print uses 4 unique filaments
Swap Instructions:
Start with Black
At layer #12 (1.04mm) swap to Red
At layer #18 (1.52mm) swap to Yellow
At layer #24 (2mm) swap to White for the rest.
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (0)