One Piece Hueforge
Print Profile(1)
Description
Boost Me (for free)
Un petit boost pour mon travail fait toujours plaisir et m'aide beaucoup :)
https://www.patreon.com/cw/3D_MENTIEL
Si vous aimez mon travail, venez faire un tour sur mon Patreon
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
The Model is 199.98x199.98mm in size
You may print at higher layer heights below the Base Thickness of 0.8mm
The Max allowed Thickness is 2.56mm and the Actual Thickness is 2.56mm
#000000 PLA Deeplee Black Transmission Distance: 0.2
#1f3f9d PLA Forshape+ Blue Transmission Distance: 2.5
#54718e PLA Forshape Grey Transmission Distance: 1.6
#ffffff PLA Forshape White Transmission Distance: 5
#d70610 PLA Forshape+ Red Transmission Distance: 3.6
#ff7752 PLA Forshape+ Orange Transmission Distance: 5
#f7e735 PLA Forshape+ Yellow Transmission Distance: 7.1
This print uses 7 unique filaments
Swap Instructions:
Start with Black
At layer #10 (0.88mm) swap to Blue
At layer #12 (1.04mm) swap to Grey
At layer #15 (1.28mm) swap to White
At layer #17 (1.44mm) swap to Black
At layer #21 (1.76mm) swap to Red
At layer #23 (1.92mm) swap to Orange
At layer #26 (2.16mm) swap to Yellow
At layer #29 (2.4mm) swap to White for the rest.
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (0)