Summary:

A refrigerator magnet to promote making Amerca great again. No MMU or AMS necessary, simply pause on layers to change filament. Magnet measures about 3.5" (89mm) wide.

Print settings:

PLA, 0.4 nozzle, 0.2 layers, 2 walls, 15% grid infill, classic walls, detect thin walls turned on, optional ironing. I also prefer a smooth build plate for magnets.

Magnets:

Designed for three 6x3 magnets. My magnets actual measurement was 6.0mmx2.7mm so the magnet hole is 6.3x3.2. I paused on the top magnet cavity layer and super glued the magnets in before resuming the print.

Filament changes:

Color order for filament changes: blue, white, red, black, white

If you stick with 0.2 layer heights:

• Layer 19 - Insert magnets
• Layer 22 - Change blue to white
• Layer 25 - Change white to red
• Layer 28 - Change red to black
• Layer 31 - Change black to white

*Be sure to double check your slicer for layer pauses