Washington Capitals - NHL Hueforge
For this print, I used inspiration from their alternate Eagle-head logo.
The rest of my NHL Hueforges can be found in this collection here:
https://makerworld.com/en/u/4065522623/collections/549654
I have assigned the model to have a variable layer print height, which means that the first 4 layers of the model will print with a 0.16 layer height, and switch to a 0.08 layer height for the details. If you use my uploaded print profile this will save you time on your print as the first 0.64mm is just to provide stability to the print for display. This means that the layer heights listed below in my printing instructions will not match my print profile (they will be off by 3) but the mm heights will still match! Do not change the print profile to match or it will not look the same!
If you resize the model make sure you do NOT scale the Z axis or the print colours will not be in the same position
Please post a picture of your printed copy! I'd love to see it!
If you like my work and want to leave a tip to help with the costs of filament donations can be made here:
https://www.paypal.com/donate/?hosted_button_id=9BVH6Q453Y2K8
— Printing Instructions---
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
Filaments Used:
PLA BambuLab Basic Black Transmission Distance: 0
PLA Sunlu Matte Blue Transmission Distance: 3
PLA Sunlu Red Transmission Distance: 5.1
PLA Generic White Transmission Distance: 3
Swap Instructions:
Start with Black
At layer #13 (1.12mm) swap to Blue
At layer #17 (1.44mm) swap to Red
At layer #22 (1.84mm) swap to White for the rest.