Fidget Stairs Cube
Copyright Claim
Fidget Stairs Cube
Boost
236
353
134
GIF
Print Profile(12)
![[3x3] [Closed] 0.2mm layer, 2 walls, 15% infill](https://makerworld.bblmw.com/makerworld/model/USdac483475d5a2f/57910995/instance/2024-03-11_4d3bb987ab818.png?image_process=resize,w_100/format,webp)
[3x3] [Closed] 0.2mm layer, 2 walls, 15% infill
Designer
1.8 h
1 plate
![[4x4] [Closed] 0.2mm layer, 2 walls, 15% infill](https://makerworld.bblmw.com/makerworld/model/USdac483475d5a2f/57911271/instance/2024-03-11_2a50b0f161a0c8.png?image_process=resize,w_100/format,webp)
[4x4] [Closed] 0.2mm layer, 2 walls, 15% infill
Designer
3.2 h
1 plate
![[3x3] [Open] 0.2mm layer, 2 walls, 15% infill](https://makerworld.bblmw.com/makerworld/model/USdac483475d5a2f/57910784/instance/2024-03-11_9a65fff29d4de8.png?image_process=resize,w_100/format,webp)
[3x3] [Open] 0.2mm layer, 2 walls, 15% infill
Designer
1.6 h
1 plate
Tolerance Test 0.2mm layer, 2 walls, 15% infill
Designer
22 min
1 plate
Click to see more
Boost
236
353
134
6
944
665
Released
Description
Fidget Stairs Cube
Should be fairly easy to print with default settings
Comment & Rating (134)
All
Printed fine on my X1C, tolerances a little tight but it loosens up.
Complete fusion on my A1, both models, couldn't even hammer them apart to loosen anything, just took a beating until it cracked under stress.
The designer has replied
2
Reply
Oh :/ I don't have an A1 to try it unfortunately, is it supposed to be less accurate? I could add some looser print profiles for A1
ps: thx for not just putting a 1 star review
(Edited)1
Reply
Replying to @Lockwick
I printed one on my A1 Mini tonight. I see what he's talking about, had to take a utility knife to separate at the bottom. I think that it's due to the A1 and A1-Mini having a default value of 0 for Elephant Foot Compensation and the P1x/X family default to .015. Might try to print another and set the compensation to 0.15 on the A1-Mini.
0
Reply
Replying to @JeffSmith
I added a [Loose Tolerance] print profile that should fix the issue!
0
Reply
I madeit with esun silk
its very cool
https://kady3dprinting.com/model/fidget-stairs-cube
1
Reply
it is stuck together.
0
Reply
Print Profile
[3x3] [Closed] 0.2mm layer, 2 walls, 15% infill
cool print
0
Reply
Print Profile
[4x4 Closed for Mini]: 0.24mm layer, 2 walls, 10% infill
not as good as the 3x3. works a bit rough and had to cut apart the bottom layer
0
Reply
Print Profile
[3x3] [Closed] 0.2mm layer, 2 walls, 15% infill
used 2 color PLA, came out very nice. needs more fidgeting I guess because it gets still stuck sometimes. printed on P1S
0
Reply
Print Profile
[3x3] [Closed] 0.2mm layer, 2 walls, 15% infill
This is a fun little toy.
0
Reply
Print Profile
[4x4] [Closed] 0.2mm layer, 2 walls, 15% infill
works great, no promel at all
0
Reply
Print Profile
[3x3] [Closed] 0.2mm layer, 2 walls, 15% infill
fun print
0
Reply
Excellent print and so fun to play with! I have to keep snatching it back from my kids.
0
Reply
License
This work is licensed under a Standard Digital File License.
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Related Models
© 2024 MakerWorld