wolf hueforge
Print Profile(1)
Description
Project: lobo.hfp
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.24mm
The Model is 225.83x395.2mm in size
You may print at higher layer heights below the Base Thickness of 0.48mm
The Max allowed Thickness is 2.32mm and the Actual Thickness is 2.24mm
#080a0d PLA PolyLite Black Transmission Distance: 0.3
#4c5f71 PLA BambuLab Basic Blue Gray Transmission Distance: 3
#ffffff PLA BambuLab Basic Jade White Transmission Distance: 5
#000000 PLA BambuLab Basic Black Transmission Distance: 0.6
#e11021 PLA Copymaster 3D Red Transmission Distance: 4
This print uses 5 unique filaments
Swap Instructions:
Start with PolyLite Black
At layer #6 (0.64mm) swap to BambuLab Basic Blue Gray
At layer #9 (0.88mm) swap to BambuLab Basic Jade White
At layer #11 (1.04mm) swap to BambuLab Basic Black
At layer #15 (1.36mm) swap to Copymaster 3D Red
At layer #20 (1.76mm) swap to BambuLab Basic Jade White for the rest.
Boost Me (for free)
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (1)