Multipurpose organizer with two drawers and a hidden storage compartment.
Overall Size: 285mm,175mm,125mm (l,w,h)
The model was split into pieces to reduce supports and to fit on the average print bed.
OrganizerHalf requires support for the overhang of the end of the dividers. Recommended being printed with a brim.
Drawer holder, in the correct orientation this part requires no supports. Recommended to be printed with a brim to help build plate adhesion if needed (reduces the chances of a corner lifting off the build plate).
Drawers are printed with supports (to support handle).
Front Divider and Cover can be printed together without supports.
Infill: 25% recommended
Parts: OrganizerHalf x1, Drawer holder x1, Drawers x2, Front Divider x1, Cover x1
OrganizerHalf and Drawer holder fit into each other via slots. Apply glue to the slots and edges of the two parts to join them prenatally. Glue the front divider part in place (this part is separate to avoid supports).
If you are interested in printing one of the halves alone (organizer half or drawer half), they can be found here as two separate models.