Summary

Here my design of a Sapphire Plus cable chain. I wasn´t satisfied by the existing ones so I designed my own. It should fit for a common cable chain, I use this one: https://www.amazon.de/gp/product/B00KBPQIBE/ref=ppx_yo_dt_b_asin_title_o01_s00?ie=UTF8&psc=1

I use a piece of the original cable pipe although it sucks. You can insert small zip ties at the side of the frame mount to fix the cables. The parts are mounted with original screws to the frame. Especially the top ones are quite short so I recommend to change them to longer M4 screws. For the extruder the original M3 screws should work. The cable chain is fixed with M3 screws as well.

I also added a mirrored version for my Voron mount. Maybe anyone else needs this.

Would be great if you could give me feedback in the comments, a like and post a make if you did this.

Print Settings

Printer:

Sapphire Plus

                                            Rafts:                      
No

Supports:

Yes

                                            Resolution:                      
0.2

Infill:

                Filament:                                     Geeetech PETG                                    Blue                    
                        Notes:                     
Any material does the trick.

sapphire

sapphireplus