This is a Triangular Filament Waste Bucket-Poop Bucket with an In-bedded Bambu Labs Logo(blank and editable text versions are also available, to create what you like!). It can be attached to the back of the X1C or any other metal surface using small round neodymium magnets.

The Bambu Lab Logo is only 2 layers depth (0.4mm), allowing for minimal filament usage and minimal filament changes.

PLEASE NOTE: AMS Required (2 Different Filaments Used)

Optional Parts Required

6off - 6mm x 3mm Round Neodymium Magnets - allows the bucket to attach to the metal backplate of the printer or maybe even on a fridge door etc.(its has multiple uses).

Printing Times

4h 51m – PLA Silk Filament Profile OR 3h 29m – Normal PLA Filament Profile

Filaments Used

Ziro PLA Silk Silver - the main object body.

Bambu Lab PLA Green - the logo (I used what I had left over from the filaments that came with my X1C).

Print Settings

Quality Tab

Layer Height = 0.2mm

Wall Generator = Arachne

Strength Tab

Wall loops = 4

Sparse Infill Density = 25%

Sparse Infill Pattern= Grid

Support Tab

Enable Support = YES(TICKED)

Type = Tree(Auto)

Style = Tree Hybrid

On Build Plate Only = YES(TICKED)

Remove Small Overhangs = YES(TICKED)

Others Tab

Skirt Loops = 1

Brim Type = No Brim

Prime Tower Enabled = YES(TICKED)