Completely 3D printable bank card wallet for 5 credit cards and ejection feature. Nice modern look and stylish as well. Created and designed in Fusion 360.
Filament: extrudr Pla black & yellow
Resolution: 0.15mm for all parts
Printing time: ~4-5 hrs
Infill:
Frame: 30-50%
Everything else: 100%
Both frame parts must be glued together
Side latches must be glued on the frame´s inside (to hold the cards in place)
Important information: Your printer has to be dialed in correctly for the tight tolerances to work!
Both of the Wallet's Frame can each be printed with flat side faced the bed. No supports needed there.
Side latches (2 needed) and ejector should be placed on the side (90°). Support everywhere.