Search models, users, collections, and posts
Spitfire Plane Kit Card
IP Report
Print Profile(3)
0.12mm layer, 2 walls, 15% infill, 1 color
Designer
1.6 h
1 plate
0.12mm layer, 2 walls, 15% infill, 2 color
Designer
3.1 h
1 plate
0.12mm layer, 2 walls, 15% infill, 3 color
Designer
3.3 h
1 plate
Open in Bambu Studio
Boost
990
2306
123
36
2.4 k
1.3 k
Released
Description
Spitfire Plane kit card. If the parts don't snap together use glue.
print settings:
-Layer Height 0.12 mm
-Initial layer Height 0.2 mm
-normal support
-no raft or skirt
instructions:
-remove every element from the frame
-put together the propeller and its shaft
-place the assembled propeller, rear landing gear and interconnect into one side of the fuselage
-squeeze together the 2 halves of the fuselage
-assemble the wings with the provided interconnect
-push the wings into the fuselage
-place the landing gears into the wing
-glue the cockpit windshield onto the body
-push the elevators into the fuselage
Documentation (1)
Assembly Guide (1)
License
This user content is licensed under a
Creative Commons Attribution
Comment & Rating (123)