HUEFORGE Black and White Stripe Lady by IDontKnow1988

IDontKnow1988

Generative 3D Model>Hueforge & Lithophane

Print Profile(1)

All

P1S

P1P

X1 Carbon

X1E

0.08mm layer, 1 walls, 100% infill

Designer

8.1 h

1 plate

5.0(3)

Open in Bambu Studio

Boost

Released

Description

I Love making Hueforge Pictures and I am going to upload more and more of them so follow me if you like my work and i would be happy if you give me a like :)

You dont need an AMS . you can change manually the Filament if you want.

you can also use other Filament if you like

Use my Settings for best Results.

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

Filaments Used:
PLA+ Sunlu Black Transmission Distance: 0.6
PLA+ Sunlu Grey Transmission Distance: 2
PLA+ Sunlu Silver Transmission Distance: 2
PLA+ Sunlu White Transmission Distance: 5

Swap Instructions:
Start with Black
At layer #12 (1.04mm) swap to Grey
At layer #16 (1.36mm) swap to Silver
At layer #23 (1.92mm) swap to White for the rest.

Comment & Rating (8)

@Monty

is the 'grey' a darker colour that the silver ? Mine seem be both the same

The designer has replied

@IDontKnow1988

Yes. Grey is darker than Silver. its perfect for more details ;) Which Filament do u use? also Sunlu?

@Monty

Replying to @IDontKnow1988 :

Yer SunLu But my 'grey' is the same shade/tone as the 'silver' Need to get some more darker grey but I can't find it here in the UK.

@IDontKnow1988

Replying to @Monty :

that is strange. perhaps the label is wrong and its both grey or silver ??? its definitly not the same shade/tone.... Compare your filament with pictures from the sunlu website pls. that is not normal