As I currently have quite a few bags of Huel powder, I got mildly annoyed that I couldn't always find my Huel Scoop, because it was in one of the other bags.
So, I ended up designing a very simple measuring cup with the same volume as the original Huel Scoop.

To measure the volume of the Huel Scoop, I simply filled it with water and weighed it (the Scoop itself was subtracted using the Tare function on the scale).
As can be seen from the pictures of the model, both the original scoop and my printed version contains 92 grams of water, so the volume of the scoops are more or less the same (+/- a percentage or two due to potential overfilling while not breaking the water tension).

Yes, yes, 3D-printed stuff isn't necessarily food safe - I know. But seeing as this scoop is used only for dry powder, which is being kept in a sealed ziplock bag, I assume bacteria and mold won't be too much of an issue.

Enjoy and Happy Printing!