Print Profile(1)
Bill of Materials
Description
Modular Table Lamp is a 3D printed table lamp compatible with a standard E14 socket.
The parts connect using snap-fit joints and allow downward lighting with partial upward light diffusion.
Technical Specifications
- Recommended layer height: 0.2 mm
- Infill percentage: 15%
- Supports: Not required
Printing/Assembly Instructions
- Print all parts in the provided orientation.
- Insert the E14 socket into the designated housing.
- Secure the socket using the retaining ring included in the cord kit.
- Route the electrical cord through the base opening.
- Assemble the printed parts by pressing them together until the snap-fit joints engage.
- Install an E14 bulb.
The lamp is composed of multiple separate parts, allowing different filament colors to be combined if desired, similar to the ceiling variant.
In the current configuration, the lamp directs light downward and partially upward for heat dissipation.
For single-direction lighting (downward only), place the optional top disc onto the upper opening to reduce upward light diffusion.
Additional Components
- E14 cord set with socket and retaining ring: https://amzn.to/4rKTGxd
- Alternative E14 cord set: https://amzn.to/47ciiX5
If adjustments are required to fit different hardware, dimensional modifications can be made upon request.
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (0)