spiderman hueforge

Project: spider man.hfp

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.24mm

The Model is 252.65x449.19mm in size

You may print at higher layer heights below the Base Thickness of 0.72mm
The Max allowed Thickness is 2.72mm and the Actual Thickness is 2.16mm

    #080a0d PLA PolyLite Black  Transmission Distance: 0.3
    #fb0a09 PLA Creality Hyper Red  Transmission Distance: 3.7
    #00358e PLA BambuLab Basic Blue  Transmission Distance: 4
    #e2dedb PLA PolyLite White  Transmission Distance: 5
This print uses 4 unique filaments

Swap Instructions:
    Start with PolyLite Black
    At layer #9 (0.88mm) swap to Creality Hyper Red
    At layer #11 (1.04mm) swap to BambuLab Basic Blue
    At layer #15 (1.36mm) swap to Creality Hyper Red
    At layer #20 (1.76mm) swap to PolyLite White for the rest.