internetofmine

cover

IMG_20240311_130735_3abc21f8-f2b5-4b08-b1cf-e1e8d932f0ad.webp

plate_1.png

plate_2.png

plate_3.png

This should print fine in whatever sensible way you set it. It can print in one part, but if you don't presupport the head it will give you ugly overhangs, and with supports.. well we all know how supports work on geometry. On the other hand, you can print it in 2 parts (added plate with pre-cut model to the m3f file). Prints nicely then, but still you have to handle the seam and possible extrusion lines in different directions. Coat of paint should cover direction lines, seam might take some post processing, but that is outside of the scope of this description. Additionaly there is old stand, originally whole model was on quite a big stand, but it bloated the printing time without adding much to model, I cut it off, but kept for anyone who wishes to print it as well.I have printed it on 0.12 layer, supports. Tried with PLA and PLA Matte. Also tried with both Bambulab and offbrand filaments.

0.12mm layer, 2 walls, 5% infill

This is old model of mine containing a figure of Shai-Hulud, the famous sandworm of Dune. It is based on classic sandworm design from the 1984 Dune movie.

Print Profile(1)

Description

Comment & Rating (0)

License

Related Models

Dune Sandworm Emblem

Dune Shai-Hulud Coaster

waste eater (A1 mini)

HueForge Dune Sandworm

Shai Hulud