Thanks for showing, looks nice in black too! The supports are a bit small yeah, a strong adhesive and clean building plate is highly recommended :)

fijter

Beautiful print, (my app wouldn't let me rate it).  Two of the supports fell off with about 20% left of the printing so a few of the knobs are messy but the rest look great. Very sturdy and a great dollhouse piece.

Ponti

Toddy 1963

Scale 1:12 - 0.2mm layer, 2 walls, 15% infill

Felix

jiukexian

Scally

Marina

user_1996039544

KekaRT

Omer B.

user_1340012875

Scale 1:8 - 0.2mm layer, 2 walls, 15% infill

cover

IMG_5031_0ab660a1-fb63-4668-a804-443310c9f689.jpg

IMG_5023_8810c8ce-c9c2-42d9-b8c4-51a03ebbdb41.jpg

IMG_5024_a4348e49-7ecf-42ca-8d06-4e63f3dbdf02.jpg

IMG_5025_7146ab24-9b73-4bd7-bc63-3574bb60ef5c.jpg

IMG_5026_86cbcc68-63f6-460a-829c-588c8c503c85.jpg

IMG_5028_6ab2ac9d-61a2-463d-ae4d-4a925bb3c22d.jpg

IMG_5029_9ccb79d3-d3bc-49a5-8885-dff65aeb7aa7.jpg

Hemnes_cabinet_wider_drawer_higher_2024-Mar-11_09-27-20AM-000_CustomizedView7126560508_712e5e59-fb8e-46bc-a3d1-d83f3dcd3483.png

Hemnes_cabinet_wider_drawer_higher_2024-Mar-11_09-27-55AM-000_CustomizedView4841055570_a586e6ef-a03d-489a-9fe0-0d43ae4f3567.png

IMG_5024_ff5b364c-263e-4cb5-93de-003bdfbbd7d0.webp

plate_1.webp

plate_2.webp

1-12 scale cabinet

plate_1.png

1-12 scale drawers

plate_2.png

A 1:12 scaled print, dual color but you can remove the second color if you like and paint manually instead or leave it in the same color<ul><li>Some minor supports are needed, but they are very easy to remove</li><li>Tweaks are recommended for support if you use special support material, if just using normal PLA only leave as is</li><li>It's recommended when printing with black and white specifically to not skimp out on the flush values and prime tower, if you do you will end up with the black bleeding into the white of the cabinet giving a gray band. </li></ul>

IMG_5025_93be08e4-2c19-4f06-bba9-ad96e337045f.webp

1-8 scale cabinet

1-8 scale drawer

A 1:8 scaled print, dual color but you can remove the second color if you like and paint manually instead or leave it in the same color<ul><li>Some minor supports are needed, but they are very easy to remove</li><li>Tweaks are recommended for support if you use special support material, if just using normal PLA only leave it as is</li><li>It's recommended when printing with black and white specifically to not skimp out on the flush values and prime tower, if you do you will end up with the black bleeding into the white of the cabinet giving a gray band. </li></ul>

This is a dollhouse chest with loose drawers inspired by the HEMNES model offered by IKEA; But unlike the Swedish furniture maker no further assembly is required after printing - just slide the drawers in and it's done. It's recommended to print the drawers with supports for the handles, ideally with special support material so that you get the cleanest look (I did not in my prints and this have a little sag at the underside of the buttons). The cabinet is flat at the back to make it easier to print and put against a wall without a gap in between.

Dollhouse chest/cabinet with drawers, scale 1:8 and 1:12 - Inspired by IKEA Hemnes

Global

Print Profile(2)

Description

Comment & Rating (11)

License

Related Models

Rollcage for MST E30 rc drift car body

Diorama Miniature Dumpster, scale 1:12 or 1:18

1/12 Scale Construction Barricade Barrels

Not So Magic 8-Ball