The graphic montage is our own. I hope you like it.

Painting of the animation series "Solo Leveling" in three colors.

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

Filaments Used:
PLA BambuLab Basic Black Transmission Distance: 0.6
PLA BambuLab Matte Marine Blue Transmission Distance: 2
PLA BambuLab Basic Jade White Transmission Distance: 5

Swap Instructions:
Start with Black
At layer #10 (0.88mm) swap to Blue
At layer #13 (1.12mm) swap to White for the rest.