Dog Food Scoop (1 Cup) by Freespherical

Freespherical

Household>Pets

Print Profile(1)

All

P1S

P1P

X1 Carbon

X1E

0.2mm layer, 2 walls, 25% infill

Designer

1.6 h

1 plate

5.0(3)

Open in Bambu Studio

Boost

Released

Description

Dog Scoop (1 Cup)

This is a simple dog scoop that is 1 cup in size. You can scale it to be any size you want for example: If you want a 7/8 of a cup scoop then scale it to 87.5% size. Take another 12.5% away for every 8th a cup you want to take away.

Scales

1 cup = 100%

7/8 cup = 87.5%

3/4 cup = 75%

5/8 cup = 62.5%

1/2 cup = 50%

3/8 cup = 37.5%

1/4 cup = 25%

1/8 cup = 12.5%

How To Make the Paws a Different Color

In the pictures I had black filament print up to the paws, then I switched it to white. Once it had printed past the paws I switched it back to black so that the paws would stand out more.

Comment & Rating (5)

@Deltree3D

Print Profile

0.2mm layer, 2 walls, 25% infill

@brombomb

I needed a half cup, and you wrote down to scale to 50%. I trusted your math, even when I knew I shouldn't. For the base model, it has a radius of about 44mm, and a height of 48mm. Giving a total volume of 291 cubic cm. Scaling down to 50% as suggested you get 22mm radius and a height of 24mm, or 36 cubic cm, which is just about 12%, or 1/8 of a cup. Now I have a teeny tiny cup and need to print another one. Here is a more accurate chart: 7/8 cup = 95.65% 3/4 cup = 90.86% 5/8 cup = 85.50% 1/2 cup = 79.37% 3/8 cup = 72.11% 1/4 cup = 63.00% 1/8 cup = 50.00% These percentages are based on cup sizes (around 240ml) instead of pure volume sizes as suggested by google.

The designer has replied