Goku Truibuto a Akira Toriyama creado por IA y usando Hueforge para su impresion en 3D
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
Filaments Used:
PLA Jayo Negro Transmission Distance: 0.3
PLA BambuLab Basic Jade White Transmission Distance: 6
PLA Jayo Negro Transmission Distance: 0.3
PLA BambuLab Basic Orange Transmission Distance: 5
PLA BambuLab Basic Yellow Transmission Distance: 6
Swap Instructions:
Start with Negro
At layer #7 (0.64mm) swap to Jade White
At layer #15 (1.28mm) swap to Negro
At layer #18 (1.52mm) swap to Orange
At layer #22 (1.84mm) swap to Yellow for the rest.