我制作了一个拓竹X1的板件拼插模型,感谢Catherine Doucet的项目提供给我的灵感。
这个模型是缩小版的拓竹X1,并且长宽高都保持了正确地比例。
I've created a Bambu X1 Model Kit, inspired by the project provided by Catherine Doucet.
This model is a miniature version of the Bambu X1, maintaining accurate proportions in length, width, and height.
我为其尽可能地添加了一些细节,使其看起来更加精致。
模型非常容易打印,不需要添加任何支撑。耗材只需要有黑色和灰色两种颜色。
拼装好后的模型非常坚固,因为相比于Catherine Doucet的项目,我封闭了模型的底面。
I've added as many details as possible to make it look more exquisite.
The model is very easy to print and doesn't require any support structures. You only need black and gray filament.
The assembled model is quite sturdy, as I've closed the bottom surface compared to Catherine Doucet's project.
使用P1S打印大约需要两小时。
模型拼装好后的尺寸大约是45×45×54.6mm(不含某些凸出的部分)。
Printing with P1S takes approximately two hours.
The dimensions of the completed model are approximately 45 x 45 x 54.6 mm (excluding some protruding parts).
Update as of 2024/3/18
最初上传的版本在使用某些材料打印时可能会出现一些问题,因此我新上传了一个修正版。
你可以使用“Revised Version (larger holes, bug fixes)”这个打印配置来进行打印。
我用手头仅有的拓竹PLA重新进行了打印测试:
The version I initially uploaded might present some issues when printed with certain materials. Therefore, I have uploaded a revised version. You can use the "Revised Version (larger holes, bug fixes)" Print Profile for printing.
I have re-tested the print using the limited Bambu PLA material I had on hand:
有些孔可能比较大,需要使用一点胶水把零件粘牢固。
Some holes on the parts may be larger, requiring a small amount of glue to securely adhere the parts together.
希望你能喜欢这个模型!
I hope you like this model!
灵感来源(Inspiration source):
https://makerworld.com/zh/models/199117