Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
Filaments Used:
PLA+ JAMGHE Black Transmission Distance: 0.3
PLA BambuLab Matte Dark Red Transmission Distance: 1.5
PLA BambuLab Matte Sakura Pink Transmission Distance: 3
PLA BambuLab Matte Ivory White Transmission Distance: 10
Swap Instructions:
Start with Black
At layer #6 (0.56mm) swap to Dark Red
At layer #8 (0.72mm) swap to Sakura Pink
At layer #13 (1.12mm) swap to Ivory White for the rest.