I am glad to present you with this cute easter train. This is the perfect gift to put on your easter baskets. My kid absolutely loves playing with it.

For the whole set you will need:

• The 3d printed parts (for the locomotive you can choose to print either the 3part or 5 part one, more info below)
• Superglue or other glue that works for the material you are printing
• 3x12mm wood screws to affix the wheels and magnets - One per wheel and one per magnet.
• Round neodymium magnets with a hole in the middle (I used a pack from Amazon with 8mm length, 3mm height, and 3mm hole diameter)

There are two versions of the locomotive, one made of 3 parts, and one made of 5 parts. This is to give you more flexibility for coloring it and save filament when printing multi-color parts.

The parts slide in the base and should be glued in.

I printed the egg in white Matte so that my kid could paint it with a permanent marker, he loved to personalize his train.

Wheels are fixed by 3x12mm wood screws. Leave a little play so that the wheels can rotate freely without being too wobbly. The trains connect via the donut-shaped cheap magnets. Magnets are fixed by the same screws and glued as well.

The bunnies and grass are compatible with the brio container trains, making it super modular.

My tip is to print the bunnies and grass first so that your kid can start playing while you print the rest.

Have fun!