说明

这是适用于拓竹 P1S / X1 / X1C 等封箱3D打印机型的空气过滤器，您可以自由的在里面安装过滤材料，包括但不限于：活性炭、高锰酸钾球，您可以安装直径大于 3mm 的柱状或者颗粒填充物。

警告

为了保证空气过滤器不会在使用过程中受仓温过高的影响而被软化，强烈建议您使用 PETG 或者 ABS 等软化温度略高的材料进行打印，请避免使用PLA材料进行打印。

Instructions

This is an air filter suitable for the sealing 3D printer models such as BambuLab P1S/X1/X1C. You are free to install filter materials inside, including but not limited to: activated carbon, potassium permanganate balls. You can install cylindrical or granular fillers with a diameter greater than 3mm.

Warning

In order to ensure that the air filter is not softened by the high temperature in the chamber during use, it is strongly recommended to use materials with slightly higher softening temperatures such as PETG or ABS for printing. Please avoid using PLA materials for printing.