Credit to the picture goes to: https://twitter.com/arts_dragonb
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
Filaments Used:
PLA Overture Black Transmission Distance: 0.7
PLA Overture Red Transmission Distance: 4.8
PLA BambuLab Basic Beige Transmission Distance: 8
PLA BambuLab Basic Gold Transmission Distance: 5
PLA BambuLab Basic Jade White Transmission Distance: 5
Swap Instructions:
Start with Black
At layer #10 (0.88mm) swap to Red
At layer #13 (1.12mm) swap to Beige
At layer #17 (1.44mm) swap to Gold
At layer #18 (1.52mm) swap to Jade White for the rest.