Tomtom rider 550 GPS Mount Thruxton 1200 R
Print Profile(1)
Description
Tomtom Rider 550 mount for the Triumph Thruxton 1200 R for use with a hollow stem nut like this one https://www.probolt-germany.com/alu-honda-gabelbruckenzentrallenkkopf-mutter-10-gebohrt-ltyokeo20/ from probolt (also available from other places)
Will require disassembly of the original rider 550 charging mount, supergluing the springs into their places on the printed mount for easier reassembly along with soldering a longer cable unto it. Then just resolder the stock connector on the other side of the extension and lead it through the fork stem.
Will preferably require drilling and tapping an m4 hole into at least 1 side, preferably all 6 to make alignment easier. Along with a short 10mm m4 bolt to secure the mount.
It CAN friction fit very snugly without any drilling required, but I didn't risk it.
License
You may create derivative works based on this object, provided that all such derivative works are published exclusively on the MakerWorld platform and include proper attribution to the original creator. You may not share, upload, host, distribute, or publish this object—or any derivative work of this object—on any other digital platform, marketplace, or distribution channel. Commercial use of this object and any derivative works is strictly prohibited. This includes, but is not limited to, selling, renting, sublicensing, or using the object in any context in which you receive monetary compensation or other financial benefits.
Comment & Rating (0)