NOTE!!!! some people have had to scale this up by two percent to compensate for their printer undersizing the threads. It has been a mixed bag depending on the printer used. I would build this into the design but the CAD program only gives me limited options for threads.
This is a Jig designed to cut the notch for binding/ trim in a wooden instrument. It is most common in guitars but I am using it for a Hurdy Gurdy.
I designed it with an ANSI Unified Screw Threads 3/4-12 UN 3B thread. This fits the Dremel 200 that I own.
It is designed to give a 1.5 x 4 -12 mm notch. You can adjust the bit in the dremel chuck to change the second dimension from 4mm to 12mm. If you would like the depth (1.5mm) to be different feel free to buy me a coffee and send me an email when doing so and I will adjust it to what ever you would like.
If you found this useful, please donate what you think it is worth on the tip me option or go to https://ko-fi.com/manmade
and by me a coffee. Please help me cover the time of design.
Thanks, Enjoy!
Printer brand:
Creality
Printer:
CR-10
Rafts:
No
Supports:
No
Resolution:
.2mm
Infill:
20%
Filament brand:
Esun
Filament color:
blue
Filament material:
PLA