I made this for myself!

If you only have 1 AMS use the trick where you leave one filament empty then once the printer pauses to reload you can change any other colors to finish the print!

I hope you enjoy!

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

Filaments Used:
PLA BambuLab Basic Black Transmission Distance: 0.6
PLA BambuLab Basic Orange Transmission Distance: 5
PLA Overture Matte Light Brown Transmission Distance: 0.6
PLA BambuLab Basic Silver Transmission Distance: 0.5
PLA BambuLab Basic Jade White Transmission Distance: 3

Swap Instructions:
Start with Black
At layer #15 (1.28mm) swap to Orange
At layer #18 (1.52mm) swap to Light Brown
At layer #22 (1.84mm) swap to Silver
At layer #26 (2.16mm) swap to Jade White for the rest.