As a big dart fan, I designed Luke Littler's dart card as a Hueforge version. This will enhance every dart room, have fun with it!

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

Filaments Used:
PLA Black Transmission Distance: 0.3
PLA Gray Transmission Distance: 2.5
PLA Yellow Transmission Distance: 8
PLA White Transmission Distance: 6

Swap Instructions:
Start with Black
At layer #7 (0.64mm) swap to Gray
At layer #12 (1.04mm) swap to Yellow
At layer #16 (1.36mm) swap to White for the rest.