iPhone 12/13/14/15 Pro Stand
Copyright Claim
iPhone 12/13/14/15 Pro Stand
Boost
34
51
25
Print Profile(2)
0.2mm layer, 3 walls, 20% infill
Designer
1.6 h
1 plate
0.2mm layer, 2 walls, 15% infill
1.9 h
1 plate
Boost
34
51
25
1
220
141
Released
Description
Fits an iPhone 14 Pro (without a case) best, but will work for 12 to 15 (Pro or not).
I use it to look at recipes on my kitchen counter. I added rubber foots for more grip.
Comment & Rating (25)
All
Print Profile
0.2mm layer, 3 walls, 20% infill
My print of this ended looking like this. What can be done to correct it ? it´s on a P1S which normaly prints fine
0
Reply
Boosted
i had similar issues with my first print. for the second one, I changed the filament type to what I'm using (Bambu PLA basic), used 0.16 High Quality setting, and took the top off so the chamber wouldn't be as hot. That resulted in a nearly flawless print.
0
Reply
Print Profile
0.2mm layer, 3 walls, 20% infill
Nice and clean. Printed very well without any support.
1
Reply
Print Profile
0.2mm layer, 3 walls, 20% infill
print is sized for phone without case, be sure to measure what size you need and adjust before printing. It turned out amazing!
2
Reply
FOR PHONES WITHOUT A CASE - Great print, super clean. If you need a slick stand and your phone has no case, this is a solid choice.
The designer has replied
0
Reply
Oh thanks, I've added a clarification in the description
0
Reply
Print Profile
0.2mm layer, 3 walls, 20% infill
A true patriot here it printed alright but didn't realise it didn't fit a 14plus
The designer has replied
0
Reply
hahah oh no! I'll need to make a 14 Plus version (which should fit a 14 Pro Max too)
0
Reply
Print Profile
0.2mm layer, 3 walls, 20% infill
Very nice. Can you add a case version?
0
Reply
Not large enough for a 15 Pro Max.
0
Reply
Print Profile
0.2mm layer, 3 walls, 20% infill
sieht gut aus aber wenn das Handy eine Case an hat,passt es nicht rein schade. Werde die Maße ändern und denke es passt dann. Lg René
0
Reply
Print Profile
0.2mm layer, 3 walls, 20% infill
0
Reply
Print Profile
0.2mm layer, 3 walls, 20% infill
0
Reply
License
This user content is licensed under a
Creative Commons AttributionRelated Models
© 2024 MakerWorld