I was asked by a friend if i could get the model printed on the plate so here it is.

Beware : i have added 2 pictures of a model printed with 0,4 nozzle ( green letters ) and the oher with a 0,2 nozzle ( red letters )

RECOMMEND the 0,2 nozzle

Because the text is very small it will miss some of the details in 0,4 nozzle.

I have tested the model with removing the lines before printing but should be no problem to cross them ( if you forget ) no guarentees ;)

The model is in total 2,55 mm thick if you wish to save some white filament cut it on 1mm height less will make the white not completely opaque.

Hope you enjoy it….