Patriotic flag designed during the American Revolution turned into a refrigerator magnet using three 6x3 magnets.

Summary:

Gadsden Flag themed magnet with no MMU/AMS needed for multiple colors, simply pause on layers to change filament. Magnet measures 3"x2.67" (76mmx68mm) WxH.

Print settings:

PLA, 0.4 nozzle, 0.2 layers, 2 walls, 10% gyroid infill, classic wall, detect thin walls turned on, optional ironing. I also prefer a smooth build plate for magnets.

Magnets:

Designed for three 6x3 magnets. My magnets actual measurement was 6.0mmx2.5mm so the magnet hole is 6.3x3.0. I paused on the top magnet cavity layer and super glued the magnets in before resuming the print.

Filament changes:

Color order for filament changes: yellow, green, black

If you stick with 0.2 layer heights:

• Layer 18 insert magnets
• Layer 21 change from yellow to green
• Layer 24 change from green to black

*Be sure to double check your slicer for layer pauses