V3 ben and Jerry's holder new handle by johnsrestoandfab

johnsrestoandfab

Household>Other House Models

Print Profile(5)

All

X1 Carbon

P1S

P1P

X1E

A1 mini

0.2mm layer, 6 walls, 30% infill

Designer

5.3 h

1 plate

5.0(44)

0.2mm layer, 6 walls, 30% infill - A1 mini optimized

5.7 h

1 plate

5.0(5)

FAST SOLIDE PRINT in PETG, 0.28mm layer, 6 walls, 20% infill

2.9 h

1 plate

5.0(4)

0.6mm nozzle, 0.3mm layer, 2 walls, 30% infill

2.7 h

1 plate

4.0(1)

Click to see more

Boost

204

306

361

294

Released

Description

Version 3 new handle design, easier to hold. rotated the spoon holder slot to allow more room for your fingers.

Comment & Rating (71)

@user_2858905944

Print Profile

0.2mm layer, 6 walls, 30% infill

works great! first print had adhesion problems but second one worked perfect.

The designer has replied

@johnsrestoandfa

Looks great. Enjoy!

@Amethyst3D

Print Profile

0.2mm layer, 6 walls, 30% infill

Printed in Bambu PLA Matte on P1S. Works great, only thing that could make it better for me is having the bottom spoon holder slot bigger. Our spoons just barely don't sit in it, so it falls down! Otherwise, super print, and really levels up the Ben & Jerry's experience. I plan to put some kind of foam inside to help steady the cup and keep it from spinning in place when shoveling around in there, lol! May help with further insulation too. Thank you!

@i072

Print Profile

0.2mm layer, 6 walls, 30% infill - A1 mini optimized

Great print and idea.

@Kruiken

Print Profile

0.2mm layer, 6 walls, 30% infill

Looks, fits great, and printed perfectly. Thank You!

@PCHuDSoN

Print Profile

0.2mm layer, 6 walls, 30% infill

nice design a couple of design tweaks would be good, like a flat top to the handle parts and 3 finger gaps for big hands but printed fine.

@MightyHeidi

Print Profile

0.2mm layer, 6 walls, 30% infill

awesome!!

@DaisyChain

Boosted

Print Profile

FAST SOLIDE PRINT in PETG, 0.28mm layer, 6 walls, 20% infill

Really impressive print. i printed the 2.9 hour version. I had to print another one so we didn’t fight over it 🤣

(Edited)

@MightyHeidi

love it! great profile!

@Sami82

Print Profile

0.2mm layer, 6 walls, 30% infill

Thank you so much for this print! I hate having my hands freeze while digging into a tub. The spoon addition is perfect. There is a good amount of clearance above the top of the holder for the lid too. Highly recommend